Genuine & Original Full System and Spare Parts

Suitable for positive tank isolation, MMC B-type vapor-control valves are positive shut-off units that support Tri-mode tank gauging functions (ullage, interface and temperature) as well as oxygen sensing. They are available in three models. The original B-type, Micro “B” and the MMC (Asia) F50 are all 2-inch (50mm) full-bore valves. The Mini Micro “B” is 1 1/2-inch (38mm). All valves are flanged for ease in installation and accurate positioning. Constructed of 316 stainless steel with a bronze cap, they have stainless steel ball valves with Teflon seals. In addition, 1/2 or 1/3 liter sampling is available in all 2 inch sizes with the use of MMC sampling tapes. All gauging tapes fit directly into any type of MMC vapor-control valve. Accessories and Valve Adaptors-MMC Accessories and Valve Adaptors-MMC Accessories and Valve Adaptors-MMC Accessories and Valve Adaptors-MMC Accessories and Valve Adaptors-MMC Accessories and Valve Adaptors-MMC

UTI-Ullage Temperature Interface Sensing Tapes

Tankers - Barges - Chemical vessels - Petro chemical Industries

Suitable for Marine & Land-Based Tank Facilities &
for Environmental Monitoring Well applications

engine cylinder cover cylinder head connecting rods governors electronic module crankshaft camshaft bearing crankshaft bearing cr bearing main bearing auxiliary engine main engine piston cylinder liner abb bbc turbocharger gen set power plant industrial engine two stroke engine four stroke engine 2 stroke engine 4 stroke engine stork werkspoor Daihatsu bauodin Daihatsu Sulzer deutz air compressor oil separator oil purifier centrifugal separator Cylinder Head assembly inlet valve exhaust valve fuel pump fuel injection system nozzle plunger piston ring gasket Wartsila woodward diesel keiki Europa 115 87 Plus Oil Mist Detector Schaller Automation 115 87 Plus Oil Mist Detector Schaller Automation 15 PPM Bilge Alarm Smart Cell Rivertrace Ltd Water Quality Monitor oil content monitors Rivertrace Smart-Cell Bilge Alarm Smart Cell Bilge Alarm OCD CM Smart Safe ORB Smart Safe Bilge Over board Security System Smart ODME OCD 50M Boiler Condenset  Cooling Water Monitor Smart PFM Oil In Water Monitor Smart 50M Boiler Condenset / Cooling Water Monitor OCD Xtra Oil  In Water Analyser OCD Cw Oil Content Monitor IMO Resolution MEPC 60(33) 15 ppm oily water separator calibration I.M.O. resolutions MEPC 107(49) and MEPC 108 (49) 15 PPM Bilge Alarm Smart Cell 

MMC’s Flexi-Dip Restricted or Closed gauging tape units

  • Zero Ullage Reference
  • Custom-made sample 
  • Fast and easy interchange

Special adaptor barrels are available to other vapor-control valves

Closed or Restricted tank gauging and sounding equipment.

Accessories and Valve Adaptors

MMC also offers an assortment of additional gauging and sampling accessories such as pressure gauges for inert gas measurement, custom-made sounding bobs and rods, gas sampling hoses, gas sampling heads, tank bottom and zone samplers.

Custom-made sample bottle attachments are available for use with MMC’s unique “gas-tight” product sampling system. Users seeking to meet the sensitive requirements of “Reid Vapor Pressure” measurements can replace MMC’s standard 1-liter sampling bottle with a more appropriate container of their choice, or use a custom-made sample bottle and adaptor.

In addition, special adaptor barrels are available to convert other makers’ vapor-control valves in a manner that allows those valves to be used with MMC closed or restricted tank gauging and sounding equipment. All adaptor barrels are constructed and factory tested to insure that no change to an existing ZERO ULLAGE REFERENCE will occur when reading cargo level with the supplied adaptor.

Vapor Control Valves with Metric Flange Mountings and Other MMC Group Products

GVP Inert-Gas Pressure Meter

Manufactured in Japan by MMC (Asia)

  • GVP-75
  • GVP-75A
  • GVP-75ANK

GVP Inert-Gas Pressure Meter

Inert gas pressure in a tank can easily be measured by fitting the appropriate model GVP portable pressure meter on an MMC vapor control valve/tank gauging station installed on the top of the tank. The GVP-75 series pressure meters feature a gas seal mechanism to prevent gas leakage from the tank. The meter’s screw-type orifice makes it secure from sudden pressure changes and a mesh filter at the inlet prevents the intake of dust.

Range: +2500 to -1000mm (water)

Accuracy: + or – 1.5% FS

Model GVP-75

For use with vapor control valve/tank gauging station models “B,” “MB,” “MBS,” “C” (series), “D-25,” “F-50” (series), and “S” (series).

GVP-75A

For use with vapor control valve/tank gauging station (self-closing valve) models “G65K80” and “A.”

GVP-75ANK

For use with vapor control valve/tank gauging station (self-closing valve) model “ANK-52.”

D-2401-2            2401TR30MCBSSTD       30m MMC Triple function Gauging Unit, suitable for closed (restricted) petroleum gauging via MMC Type “B” vapour control valves.2401TC30MCBSC50           “30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  Suitable for CLOSED (GAS-TIGHT) gauging of petroleum products via MMC vapour control valves model ‘C50’. BASEEFA Intrinsic Safety approval.  Calibrated in degrees Celsius.Yellow box unit with black wiper housing.2401TC15MCBSSTD15m MMC GT Triple function Gauging Unit, suitable for closed (gas tight) petroleum gauging via MMC Type “B” vapour control valves.2401TR50MCBSxxx50m MMC Triple function Gauging Unit, suitable for closed (restricted) petroleum gauging via MMC Type “xxx” vapour control valves.B-2401-13ASNSA2360-4-4SPES trimode Sensor with BarrelD-2562-1TD2326RITD2562-40Mxxx40m Tank Bottom Dryness Checking (Dipping) Device, Model D-2562-1TD, suitable for closed (restricted) petroleum service via MMC type “xxx” vapour valves.TPE-133/40M-SMPGTAP-W-HOOK40m Graduated Sample Tape & Hook to suit restricted sampling unit.AMR N5040RPush Button Seal Cap.THAB2317-30M30m STD Tape & Header Assembly.B-2401-72BTrimode Hub Coverplate with PCB AssemblyCSTF/R-F/30m30m MMC Cargo Liquid Sampling Device, Model CSTF-R-F/30m, with 35m CST reel, 51S600 sample barrel, 05L43D sample bottle and SF-F/R filler. For closed sampling via MMC type “C/F50” valves.2401TC35MCBSC5035m MMC GT Triple Function Gauging Unit, Model D-2401-2, suitable for closed (gas tight) petroleum gauging via MMC type “C50” vapour valves.B-2401-13A/40m40m STD Tape & Sensor Assembly to suit restricted Triple Function Gauging Unit.2326RITD2562-40MTS40m Tank Bottom Dryness Checking (Dipping) Device, Model D-2562-1TD, suitable for closed (restricted) petroleum service via TS type “C”-SS” vapour valves.2401TC30MCBS???30m MMC Gas Tight Triple Function Gauging Unit (ullage; oil/water interface and temperature).   Suitable for CLOSED (GAS TIGHT) gauging of Petroleum Products via MMC vapour control valves (valve type to be advised).  BASEEFA Intrinsic Safety approval.  Calibrated in degrees Celsius.2401CC30MCBS???30m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals via MMC vapour control valves (valve type to be advised).  Fitted with PES sensor.   Calibrated in Degrees Celcius and Intrinsic Safety Approval.   A2562-386TTMMC Adaptor “B” to “TVC-02”.2401TR30MCBS???30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  Suitable for CLOSED (RESTRICTED) gauging of Petroleum Products via MMC vapour control valves (valve type to be advised) or via tank hatches.  BASEEFA Intrinsic Safety approval.  Calibrated in degrees Celsius.GSASSRTT/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with Tanktech “TVC-02” vapour control valves.2401TR30MCBSxxx30m MMC Triple function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC Type “xxx” vapour control valves.GSASSRF/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with MMC type “F/C50” vapour valves.2401TF30MCBS30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). Suitable for open gauging of petroleum products via tank hatches. BASEEFA Intrinsic Safety approval. Calibrated in degrees Celsius.16H1174-150SDD16″ CL Coupling, 150# ASA, studded configuration with 5 off non ratchet type cams, stn stl studs & nuts, marine service with cam guard ring, (2) Buna O-rings (1 fitted & 1 spare) and (1) spanner wrenchOR1693BX375XS16″ Coupling O-ring – Buna-N.2401CC15MCBSMM15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals and petroleum products via MMC Vapour Control valves model MB.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval.GTADP-SETSet of Gas Tight Adaptors to allow use with “MB”, “C50”, “C2-SS” and “TVC-02” vapour valves.2401TC30MCBSSTD30m MMC GT Triple function Gauging Unit, Model D-2401-2, suitable for closed (GAS TIGHT) petroleum gauging via MMC Type “B” vapour control valves.2401TR15MCBSC5015m MMC Triple function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC Type “C50” vapour control valves.2401TC15MCBSTT15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of Petroleum Products via Tank Tech TVC-02 vapour Control valves.  Unit supplied with an adaptor to give the same 320mm deduction as the existing T-2000-TFC-02 unit on board the vessel.  Fitted with PES sensor.   Calibrated in Degrees Celcius and Intrinsic Safety Approval.B2562-35-R-SBDG“B” type barel for restricted unit2401TR15MCBSxxx15m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour control valves.B2562-406-PET-40M40m MMC GT Self Contained Sampling Device, complete with 0,5 ltr Stn. Stl. zone sample can, dip bob, and (12) HDPE sample bottles, for closed (Gas Tight) sampling via MMC vapour control valves.2401SC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 1, 2 and Class 3 chemicals via MMC Vapour Control valves, type to be advised.  Fitted with PEEK sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval.Yellow Box Version with green wiper housing.TAP-WHOOK-CHGas Tight Sample Tape & Hook Assembly.2401CC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals via MMC Vapour Control valves, type to be advised.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval.Yellow Box Version with green wiper housing.2401TC15MCBS15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of Petroleum Products via MMC Vapour Control valves, type to be advised.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval.Yellow Box Version with black wiper housing.2401TR15MCBS15m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  For CLOSED (RESTRICTED) Gauging of petroleum products via MMC vapour control valves, type to be advised.  Fitted with PES sensor.   Calibrated in Degrees Celsius and Intrinsic Safety Approval.Black open framed version.2401TC35MCBSSTD35m MMC GT Triple Function Gauging Unit, Model D2401-2, suitable for closed (gas tight) petroleum gauging via MMC type “B” vapour control valves.2401TR40MCBSxxx30m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour control valves.8H22777R150SSP38″ C-L Coupling, 150# ASA, short spool piece, with 3 off ratchet type cams, (1) lifting pad, submersible service cams, cam guard ring, (2) Buna-N O-rings (one fitted & one spare) and (1) spanner wrench.2326RITD256240MC5040m MMC Tank Bottom Dryness (Sounding) Unit,  Model D-2562-1TD, suitable for closed (restricted) use via MMC type “C50” vapour control valves.SNSA2615-17REPLACEMENT OXYGEN SENSOR CELL ASSEMBLY2401TR30MCBSC5030m MMC Triple Function Gauging Unit, Model D2401-2, suitable for closed (restricted) petroleum gauging via MMC type “C50” vapour control valves.2401CC20MCBSxxx20m MMC GT Triple Function Gauging Unit, Model D2401-2, suitable for closed (gas tight) petroleum and IMO class II/III chemical gauging via MMC type “xxx” vapour control valves.SNS2360/2317TRI-MODE GAUGING TAPE SYSTEM C/W HEADER ASSY & ACC
TAPE W/ 30 M LONG
CONTROL VALVE USED F/ GAUGING : TYPE A CONTROL VALVE SIZE : 1.3/4 IN TO 2 INTHAB2317-37M37/40m STD (Restricted) Tape & Header Assembly2401TC30MCBSMM30m MMC GT Triple Function Gauging Unit, Model D-2401-2, suitable for closed (Gas Tight) petroleum gauging via MMC type “MB” vapour control valves.2318-2S-FMS-SC2” MMC Type “MB” vapour control valve with Stn stl cap. Flanged 2” 150 ASA / DN50 PN16.2401TR30MCBSMM30m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “MB” vapour valves.2401TC30MCBSxxx30m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “xxx” vapour valves.2401TR30MCBSF5030m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “F50” vapour valves.2401TR40MCBSSTD40m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  Unit suitable for  CLOSED RESTRICTED gauging of petroleum products via MMC vapour control valves model ‘B,.   BASEEFA Intrinsic Safety approval.  Calibrated in degrees CelsiusO/R12.88BX1/2XSCL Deck Cover Buna-N O-ring.A1215-3-9CL Deck Cover Cam Bolt Assembly.A1215-SPCL Deck Cover Cam Bolt Spacer (<25mm).2401TR15MCBSMM15m MMC Triple Function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC type “MB” vapour valves.Restricted Storage Barrel “B” : B2562-35-B-SBGDRestricted Storage Barrel “MB” : B2562-35-MB-SBGDRestricted Storage Barrel “C50” : B2562-35-C50-SBGD

A2562-386TTMMC Adaptor “B” to “TVC-02”.2401TR30MCBS???30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature).  Suitable for CLOSED (RESTRICTED) gauging of Petroleum Products via MMC vapour control valves (valve type to be advised) or via tank hatches.  BASEEFA Intrinsic Safety approval.  Calibrated in degrees Celsius.GSASSRTT/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with Tanktech “TVC-02” vapour control valves.2401TR30MCBSxxx30m MMC Triple function Gauging Unit, Model D-2401-2, suitable for closed (restricted) petroleum gauging via MMC Type “xxx” vapour control valves.GSASSRF/30mGas Sampling Attachment GSASSR-F with 3-way valve and standard hose 30m long, 6mm OD x 4mm ID, suitable for closed (gas tight) use with MMC type “F/C50” vapour valves.2401TF30MCBS30m MMC Triple Function Gauging Unit (ullage; oil/water interface and temperature). Suitable for open gauging of petroleum products via tank hatches. BASEEFA Intrinsic Safety approval. Calibrated in degrees Celsius.16H1174-150SDD16″ CL Coupling, 150# ASA, studded configuration with 5 off non ratchet type cams, stn stl studs & nuts, marine service with cam guard ring, (2) Buna O-rings (1 fitted & 1 spare) and (1) spanner wrenchOR1693BX375XS16″ Coupling O-ring – Buna-N.2401CC15MCBSMM15m MMC Gas Tight Triple Function Gauging Unit (Ullage; Oil/Water Interface and Temperature).  For CLOSED (GAS-TIGHT) Gauging of IMO Class 2 and Class 3 chemicals and petroleum products via MMC Vapour Control valves model MB. 

Source & Supply of Product

  • Source & Supply Most Of The Well-Known Brands
  • Source From Only ISO Certified Maker & Suppliers
  • Deliver Material Worldwide Without Delay By Maintaining Inventory On Different Locations
  • Complete Systems & Spare Parts For Instrumentation, Automation & Control For Marine, Industrial Power Plants, Offshore Vessel, Wind Power, Oil & Gas, Petro-Chemical Industry
  • More Than 20 Years Serving To The Industry
  • EuroWorld Is A Supplier For Ship Owners And Ship Managers, Power Plants, Oil & Gas Industry
  • Offering Approved And Certified For Marine Use By Societies Like DNV, BV, GL , Rina, Lloyds Register, ABS Etc.
Accessories and Valve Adaptors-MMC
Accessories and Valve Adaptors-MMC
Accessories and Valve Adaptors-MMC
Accessories and Valve Adaptors-MMC
Search
Close this search box.